Home > Tools
You are purchasing 1 set as shown of bead reamers.
They are for enlarging bead holes and making rough edges of bead holes smooth, removing thread stuck down holes, etc.
These steel reamers are coated with diamond abrasive, so should last you some time. These are the replacements when yours have worn out or broken the very thin reamer down a hole. Obviously they will work in any pin vice.
The metal holder/pin vice is best and these reamers slot away in the other end.
The manufacturers have come out with a plastic holder which is cheaper but will probably break easily I only sell the metal version which they class as the de luxe version. There is now a battery opperated Bead reamer by the Beadsmith BR801 they will fit into this.
Size: The Burr at the bottom of the photo for removing sharp edges on bead holes measures 45mm long.
Size: The longest reamer in the middle is 80mm long, at the thickest end of the abrasive it is 3.15mm diameter and thinnest is .5mm diameter.
Size: The shorter reamer is 50mm long, at the thickest end of the abrasive it is 1.7mm diameter and thinnest is .5mm diameter.
Size:Shank (the bit you clamp) is 2.3mm diameter, 18mm long.
Dispatch:- if you pay by 9am Mon-Fri your order will be posted the same day. I do not post Saturdays or Sundays.
JB4 (UK) LTD
Trading from April to November every year.